MAT37LW507E
MAT42LW507E
OPERATING INSTRUCTIONS
Oδηγίες Xρήσως
BRUKSANVISNING FÖR
BETJENINGSVEJLEDNING
COLOUR TELEVISION WITH REMOTE CONTROL
EΓXPΩMH THΔEOPAΣH
FÄRG TV MED FJÄRRKONTROLL
FARVE - TV MED FJERNETJENING
01-ENG-37737W-42737W-1072 UK-37-42 INC117MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Contents
Safety Precautions............................................................................................................................... 2
TV Accessory ...................................................................................................................................... 3
Preparation ...........................................................................................................................................4
Before Switching On Your TV.............................................................................................................. 4
LCD TV ................................................................................................................................................. 5
Remote Control Buttons ........................................................................................................................ 5
Peripheral Equipment Connections ....................................................................................................... 6
Switching The TV ON/OFF ...................................................................................................................7
Initial Settings ........................................................................................................................................7
Operating The TV .................................................................................................................................8
Menu System ........................................................................................................................................8
Other Features ...................................................................................................................................13
Teletext ...............................................................................................................................................14
Connect Peripheral Equipment ............................................................................................................16
Tips ....................................................................................................................................................17
Specifications .....................................................................................................................................18
Aerial Connection ...............................................................................................................................19
TV Accessory
SOUN
D
PICTURE FEATURE
NSTALL
WIDE
1
2
3
ABC
DEF
GHI
4
5
6
JKL
MNO
PQR
7
8
9
STU
VWX
YZ
P<P
0
-/--
EXIT
Remote Control
Part Number: 30037770
Battery
Part Number: 30002391
- 3 -
01-ENG-37737W-42737W-1072 UK-37-42 INC317MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Preparation
Before Switching On Your TV
For ventilation, leave a space of at least 10 cm free all
around the set. To prevent any fault and unsafe situa-
tions, please do not place any objects on top of the set.
Power Connection
IMPORTANT: The TV set is designed to operate
on 220-240V AC, 50 Hz.
Use this apparatus in moderate climates.
•After unpacking, allow the TV set to reach room tem-
perature before you connect the set to the mains.
Connections To The Aerial Input Socket
Features
• Remote controlled colour television.
75
• 100 programmes from VHF, UHF bands or cable
channels can be preset.
CABLE TV
VHF/UHF
REAR OF THE TV
• It can tune cable channels.
NOTE : Connect the aerial or cableTV plug to theAerial
input socket located at the rear of the TV and
connect the cable plug coming out from the TV
out socket located on the devices (VCR, DVB-T
etc.) to this socket as well.
• Controlling the TV is very easy by its menu driven
system.
• It has 2 SCART sockets for external devices (such
as video, video games, audio set, etc.)
• Stereo sound system (German+Nicam).
• Full function Teletext .
How ToConnect Other Devices
IMPORTANT: Switch off the TV before connecting
Fastext (1000 Pages), TOP text.
• Headphone connection.
any external device.
Sockets for external connections are at the rear
side of the TV. For connection of other devices via
SCART refer to the manuals of the related devices.
• Direct channel access.
• A.P.S. (Automatic Programming System).
• All programmes can be named.
• Forward or backward automatic tuning.
• Sleep timer.
Inserting Batteries In The Remote
ControlHandset
• Remove the battery cover located on the back of
the handset by gently pulling downwards from
the indicated part.
• Child Lock.
• Automatic sound mute when no transmission.
• NTSC Playback.
• Insert two AAA/R03 or equivalent type batteries
inside. Place the batteries in the right direction.
• AV in and S-VHS in are available.
• Replace the battery cover.
• It has an HDMI connector for Digital Video and
Audio. This connection is also designed to accept
High Definition signals.
• AVL (Automatic Volume Limiting)
• When no valid signal is detected, after 5 minutes the
TV switches itself automatically to stand-by mode.
• PLL (Frequency Search)
• Stereo PC Audio Input
• 3D Comb Filter
NOTE: Remove the batteries from remote
control handset when it is not to be used for
a long period.Otherwise it can be damaged
due to any leakage of batteries.
• Audio Line Out
- 4 -
01-ENG-37737W-42737W-1072 UK-37-42 INC417MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Remote Control Buttons
= Cursor Right
OK/SELECT =Okay/FreezePicture
= Cursor Down
= Stand By
FEATURE
SOUND
PICTURE
INSTALL
YELLOW / FEATURE =
Feature Menu
WIDE
GUIDE
PC
BLUE / INSTALL = Install Menu
M = Main Menu
1
2
3
= Update / No Function
ABC
DEF
GHI
= Cursor Left
4
6
5
JKL
MNO
PQR
= Hold
I-II = Mono/Stereo - Dual A-B
/ INFO = Info
7
8
9
STU
VWX
YZ
0
/ GUIDE = Index Page
/ PC=Reveal / NoFunction
0 - 9 = Direct Programme
-/-- / EXIT = No Function
V+ = Volume Up
P<P
-/--
EXIT
- P = Programme Down
= Mute
- V = Volume Down
P<P = Previous Programme
TV
DTV
P + = Programme Up
/WIDE /
= Wide / Expand
TV
DTV
= TV / Quit Menu
= Source Select
/
= No Function / Mix
AV
= Teletext
= Time / Subpage
PP = Picture Mode Selection
(Natural, Cinema, Dynamic)
31
32
RED / SOUND = Sound Menu
GREEN / PICTURE = Picture Menu
= Cursor Up
LCD TV
Stand-By
TV/AV
TV/AV
Menu
MENU
-Program+
P/CH
L
L
R
R
M
P
E
NU
SUB-OUT
/C
H
-Volume+
S
Headphone
- 5 -
01-ENG-37737W-42737W-1072 UK-37-42 INC517MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Peripheral Equipment Connections
L
L
R
R
SUB-OUT
O
S-VHS Input ------>EXT-4S
Video Input
S
L
R
T
S
UB
-
O
U
T
V
/AV
S
M
E
N
U
P
/
C
H
EXT-4
Audio Inputs
Audio Line Out
Headphone
Power cord input
Power On/Off switch
PC Audio input
Aerial
SCART 2 (EXT-2)
SCART 1 (EXT-1)
HDMI Input (EXT-5)
Component Audio Inputs
Component Video (YPbPr) Inputs
Subwoofer Out
EXT-3
220V-240V
AC~50 Hz
POWER
J
- 6 -
01-ENG-37737W-42737W-1072 UK-37-42 INC617MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Initial Settings
Initial APS (Automatic Programming
System)
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
The following menu will be displayed on the screen
when you turn your TV on for the first time. APS,
searches and sorts all channels and stores them
automatically on your TV, according to the trans-
mission of programme systems in your area.
1- Connect the power supply cord to the system.
Press On/Off switch at the rear of the TV. Then
the TV switches itself to stand-by mode and the
LED becomes BLUE located on the front of the
TV.
2- To switch on the TV from stand-by mode either:
AUTO PROGRAM
Press a digit button on the remote control so that a
programme number is selected,
English
UK
Language
Country
or,
Press “ ”, "-P/CH" or "P/CH+" button on the right
side of the TV or press “-P/CH” or “P/CH+” button
on the remote control, so that last switched off
programme is selected.
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
By either ways the TV will switch on and the LED
will turn off.
To switch the TV off:
• Press the “stand-by” button on the remote con-
trol, so the TV will switch to stand-by mode and
the LED will become BLUE,
Cancel
OK
or,
First of all choose Language and Country by us-
Press the “ ” button located on the right side of
the TV, so the TV will switch off and the LED will
become BLUE.
To power down the TV completely, press On/Off
switch,
ing “ ” or “ ” and “ ” or “ ” buttons. This will
affect the sort process in APS. To start APS, press
the REDor “OK” button.
APS is running...
UK
-
I
155,25 Mhz
or
01 - C-01
Cancel
unplug the power cord from the mains socket.
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned
to the programmes.
If you do not accept the locations and / or the
programme names of programmes, you can change
them from the Program Menu.
- 7 -
01-ENG-37737W-42737W-1072 UK-37-42 INC717MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
• For a two digit programme number enter the sec-
ond digit after pressing the first digit within 2 sec-
onds.
Operating The TV
You can operate your TV using both the remote
control handset and the buttons on the set.
Operating with the buttons on the TV set
Menu System
Your TV has been designed with a menu system to
provide easy manipulation of a multifunction sys-
tem.
Volume setting and programme selection can be
made by using the buttons on the control panel at
the top of the TV.
Volume Setting
Press the “M” button to enter the menu. Press “”
Press the "VOLUME-" button to decrease volume
or the "+ VOLUME"button to increase volume, so a
volume level scale (slider) will be displayed at the
bottom of the screen.
or “ ” button to select a menu title and then “ ” or
“
” button to select a menu item and “ ” or “ ” or
“OK” button to enter the menu item.
You can access the menus directly by pressing the
coloured buttons on the remote control:
Programme Selecting
Press the "+P/CH" button to select the next
programme or the "P/CH-" button to select the pre-
vious programme.
Red Button
Sound Menu
Picture Menu
Feature Menu
Install Menu
Green Button
Yellow Button
Blue Button
Entering The Menu
Press the “M” button on the control panel at the top
of the TV to enter the menu.
• Press the “M” or
button to return to the pre-
vious menu.
"+P/CH" / "PCH-" and "VOLUME -" / "+ VOLUME"
buttons on the TV are used as navigation buttons in
themenu.
Picture menu
By pressing “ ” or “ ” button, select the first icon.
AV Mode
Picture menu appears on the screen.
Press the "TV / AV" button on the control panel at
the top of the TV to switch your TV to EXT modes.
Operating With Remote Control
PICTURE
Mode
The remote control handset of your TV is designed
to control all the functions of your TV. The functions
will be described in accordance with the menu sys-
tem of your TV.
Cinema
62
Contrast
Brightness
24
Sharpness
10
Functions of the menu system are described in Menu
System section.
32
Colour
Colour Temp
Noise Reduction
Warm
Off
Volume Setting
Press the “V+” button to increase volume. Press
the“- V” button to decrease volume. Avolume level
scale (slider) will be displayed at the bottom of the
screen.
Film Mode
3D Comb
Reset
Off
Off
Programme Selecting
PAL 50Hz
OK
(Previous or next programme)
• Press the “-P” button to select the previous
programme.
Mode
By pressing “ ” or “ ” button, select Mode. Press
• Press the “P+” button to select the next
programme.
“ ” or “ ” button to choose one of these options:
Natural, Cinema and Dynamic.
Programme Selecting (direct access):
Picture Mode can be directly changed via pressing
the “PP” button on the remote control.
Press digit buttons on the remote control handset to
select programmes between 0 and 9. The TV will
switch to the selected programme after a short
delay.
- 8 -
01-ENG-37737W-42737W-1072 UK-37-42 INC817MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Contrast
Reset
By pressing “ ” or “ ” button, select Contrast.
By pressing “ ” or “ ” button, select Reset. Press
Press “ ” button to increase contrast. Press “ ”
“ ” or “ ” or “OK” button to reset the picture modes
button to decrease contrast. Contrast level can be
adjusted between 0 and 63.
to factory default settings.
Sound menu
Brightness
By pressing “ ” or “ ” button, select the second
By pressing “ ” or “ ” button, select Brightness.
icon. Sound menu appears on the screen.
Press “ ” button to increase brightness. Press “ ”
button to decrease brightness. Brightness level can
be adjusted between 0 and 63.
SOUND
Sharpness
Volume
10
0
By pressing “ ” or “ ” button, select Sharpness.
Equalizer
Balance
Press “ ” button to increase sharpness. Press “ ”
button to decrease sharpness. Sharpness level can
be adjusted between 0 and 31.
Headphone
Sound Mode
AVL
Stereo
On
Colour
By pressing “ ” or “ ” button, select Colour.
Effect
Off
Dynamic Bass
Subwoofer
Press “ ” button to increase colour. Press “ ” but-
Off
Off
ton to decrease colour. Colourlevel can be adjusted
between 0 and 99.
Hue
This item is displayed in picture menu when the TV
receives an NTSC signal. By pressing “ ” or “
”
button, select Hue. Press “ ” button to increase
Volume
hue level. Press “ ” button to decrease hue level.
Hue level can be adjusted between -31 and 31.
By pressing “ ” or “ ” button, select Volume.
Press “ ” button to increase volume level. Press “ ”
Colour Temp
button to decrease volume level. Volume level can
be adjusted between 0 and 63.
By pressing “ ” or “ ” button, select Colour
Temp. Press “” or “” button to choose one of
Equalizer
these options: Cool, Normal and Warm.
By pressing “ ” or “ ” button, select Equalizer.
Noise Reduction
Press “” or “” or “OK” button to enter equalizer
menu.
This item is used to reduce the image noise and
improve the picture quality at weak signals.
By pressing “ ” or “ ” button, select Noise Re-
duction. Press “ ” or “ ” button to set Noise re-
SOUND
duction level to Off, Low, Medium or High.
Equalizer
Film Mode
User
Sound Mode
120Hz
Films are recorded at a different number of frames
per second to normal television programmes.
0
0
0
0
0
500Hz
By pressing “ ” or “ ” button, select Film Mode.
1.5kHz
5kHz
Press “ ” or “ ” button to set this feature On or Off.
Turn this feature on when you are watching films to
see the fast motion scenes clearly.
10kHz
3D Comb
3D Comb is used to improve colour transitions and
colour quality of pictures.
By pressing “ ” or “ ” button, select 3D Comb.
Press “ ” or “ ” button to set this feature On or Off.
- 9 -
01-ENG-37737W-42737W-1072 UK-37-42 INC917MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
In equalizer menu the sound mode can be changed
to User, Pop, Rock, Jazz, Flat and Classic by
Balance level can be adjusted between -31 and
31.
pressing “ ” or “ ” button. Equalizer menu settings
can be changed only when Sound Mode is User.
Press the “M” button to return to the previous
menu.
Select the desired frequency by “ ” or “ ” button
Sound Mode
and increase or decrease the frequency gain by
pressing “ ” or “ ” button.
By pressing “ ” or “ ” button, select Sound
Mode. Press “ ” or “ ” button to change the mode.
Press the “M” button to return to the previous menu.
You can select Mono, Stereo, Dual A or Dual B
mode, onlyif theselectedchannel supports that mode.
Balance
By pressing “ ” or “ ” button, select Balance.
In case of bilingual broadcast (Dual Sound), you
can select original or dubbed language using mode
option.
Press “” button to increase balance to the right.
Press “ ” button to increase balance to the left.
Balance level can be adjusted between -31 and 31.
AVL
Headphone
Automatic Volume Limiting (AVL) function adjusts
the sound to obtain fixed output level between pro-
grams, having different sound levels.
By pressing “ ” or “ ” button, select Headphone.
Press “”or“”or“OK”buttonto enter hedphonemenu.
Pressing “” or “” button will turn this feature on or off.
Effect
SOUND
You can use this feature to switch the sound effect
on or off. If the current sound system is Mono and
the sound effect is switched on, then the sound will
be heard as if it is Stereo. If the current sound sys-
tem is Stereo, switching this effect on will give a
more spatial effect.
Headphone
Volume
10
Stereo
0
Sound Mode
Balance
Pressing “ ” or “ ” button will turn this feature on or off.
Dynamic Bass
Dynamic Bass is used to increase bass effect of
the TV set.
By pressing “ ”or “ ” button, select DynamicBass.
By pressing “ ” or “ ” button set Dynamic bass to
Low, High or Off. It is not recommended to select High
if listening at high volume levels. There is a subwoofer
output that can accept an active subwoofer if you
wish to create very high levels of Bass.
volume
By pressing “ ” or “ ” button, select Volume.
Subwoofer is active only if Dynamic Bass is set to
Off.
Press “ ” button to increase hp volume level.
Press “ ” button to decrease hp volume level.
SubWoofer
Headphone volume level can be adjusted be-
It is possible to connect an external, active
subwoofer to the set to give a much deeper bass
effect.
tween 0 and 63.
sound mode
Bypressing“ ”or“ ”button, selectSoundMode.
By pressing “ ” or “ ” button, select Subwoofer.
Press “ ” or “ ” button to change sound mode.
Subwoofer can be set to On or Off.
Sound mode is used to identify sound mode of the
headphone and can be set to mono, stereo,
dual A or dual B according to the transmission.
Dynamic Bass is not available if Subwoofer is set to
On.
Set Subwoofer to On when you connect an exter-
nal subwoofer to the set.
balance
By pressing “ ” or “ ” button, select Balance.
Press “ ” button to increase balance to the right.
Press “ ” button to decrease balance to the left.
- 10 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1017MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Note: Only audio output is available for EXT-3 and
EXT-5. The other options have both audio and
video outputs.
Feature menu
By pressing “” or “” button, select the third icon.
Feature menu appears on the screen.
Default Zoom
By pressing “ ” or “ ” button, select Default
Zoom. You can set Default Zoom to Panoramic,
FEATURE
4:3 or 14:9 Zoom by pressing “ ” or “ ” button.
Sleep Timer
Child Lock
Off
Off
If there is no WSS or aspect ratio (picture size)
information and zoom mode is selected as Auto by
pressing the “WIDE” button, then the zoom mode
will automatically change to Default Zoom setting.
See also Zoom Modes on page 13.
Language
English
Ext-2 Out
EXT - 1
Panoramic
Translucent
Default Zoom
Menu Background
Menu Background
30 sec
West
Menu Timeout
By pressing “ ” or “ ” button, select Menu Back-
ground. You can change menu background to Trans-
Teletext Language
lucent or Opaque by pressing “ ” or “ ” button.
Menu Timeout
By pressing “ ” or “ ” button, select Menu
Timeout. Press “ ” or “ ” button to change menu
timeout to 15 sec, 30 sec or 60 sec.
Teletext Language
Sleep Timer
By pressing “ ” or “ ” button, select Teletext
By pressing “ ” or “ ” button, select Sleep Timer.
The timer can be programmed between Off and 2
Language. Press “” or “” button to change Tele-
text Language to West, East, Cyrillic, Turk/Gre
or Arabic. This will normally be set to West for
Western Europe.
hours in steps of 10 minutes by pressing “” or “
”
button. If sleep timer is activated, at the end of the
selected time, the TV automatically goes into stand-
by mode.
Install menu
Child Lock
By pressing “ ” or “ ” button, select the fourth icon.
Install menu appears on the screen.
You can use this feature to prevent children from
turning the TV on or changing programmes or ad-
justments etc. without remote control.
The child lock feature can be set by “ ” or “ ” but-
ton to either On or Off. When Off is selected, there
will be no difference in the operation of your TV.
When Onis selected, the TV can only be controlled
by the remote control handset. In this case the con-
trol panel buttons, except the Power on/off button,
at the rear side of the TV will not work. If one of
these buttons is pressed, “Child Lock On” will be
displayed on the screen.
Language
By pressing “ ” or “ ” button, select Language.
By pressing “ ” or “ ” button, you can select the
language.
Ext-2 Out
By pressing “ ” or “ ” button, select Ext-2 Out.
You can set Ext-2 Out to TV, EXT-1, EXT-3, EXT-4
Program
or EXT-5 by pressing “” or “” button.
By pressing “ ” or “ ” button, select Pro-
gram. Press “ ” or “ ” button to select the pro-
gram number. You can also enter a number via
- 11 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1117MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
digit buttons on the remote control. There are
100 program storage between 0 and 99.
Program menu
By pressing “” or “” button, select the fifth icon.
Program menu appears on the screen.
Band
Band can be selected either “C” or “S” by press-
ing “ ” or “ ” button.
Channel
PROGRAM
Channel can be changed by “ ” or “ ” button
or Digit Buttons.
01 ITV
02 ZDF
03 CH5
11
12
13
C - 43
C - 64
C - 68
Colour System
04 C - 02
05 C - 05
14
S - 40
By pressing “ ” or “ ” button, select Colour
15
- - - - -
System. Press “” or “” button to change the
colour system to PAL, SECAM, PAL60 orAUTO.
06 C - 06
07 C - 08
16
17
- - - - -
- - - - -
If Sound System is set to I, SECAM is not avail-
able for the Colour System.
08 C - 21
09 C - 23
10 C - 35
18
19
20
- - - - -
- - - - -
- - - - -
Note:In EXT mode, you can choose NTSC 3.58
and NTSC 4.43 as well.
Name
Delete
Insert
APS
Sound System
By pressing “ ” or “ ” button, select Sound
System. Press “ ” or “ ” button to change the
By moving the cursor in four directions you can
reach 20 programmes in the same page. You can
scroll the pages up or down by pressing the navi-
gation buttons to see all the programmes in TV mode
(except theAV mode). By cursor action, programme
selection is done automatically.
sound system to BG, DK, I, L or LP.
Fine Tune
By pressing “ ” or “ ” button, select Fine Tune.
Press “ ” or “ ” button to adjust the tuning.
Search
Name:
By pressing “ ” or “ ” button, select Search.
To change the name of a decided programme, se-
lect the programme and press the RED button.
Press “ ” or “ ” button to start program search-
ing. The searching will stop when a signal is
found. You can also enter a frequency value
directly by pressing the digit buttons.
The first letter of the selected name starts to blink.
Press “ ” or “ ” button to change that letter and
“ ” or “ ” button to select the other letters. By press-
ing the RED button, you can store the name.
VCR (Video Cassette Recorder)
• If you want to watch a VCR source then it will be
better to set VCR mode “on”. For this, while the
cursor is on this item press the“ ” or “ ” buttons
Insert:
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
gation buttons move the selected programme to the
decided programmespace andpress theGREEN but-
ton again.
to set it “On”.
• If you want to watch a DVD, then you must
set this item “Off”.
Store Program
Delete:
By pressing “ ” or “ ” button, select Store
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
Program. Press “ ” or “ ” or “OK” button to
store the adjustments. “Program Stored” will be
displayed on the screen.
APS (Automatic Programming System)
When you press the BLUE button forAPS, the follow-
ing warning screen will be displayed.
- 12 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1217MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Other Features
TVStatus
PROGRAM
WARNING !
Programme Number, Programme Name,
Sound Indicator and Zoom Mode are displayed
on the upper right side of the screen when a new
Country
UK
programme is entered,
button is pressed.
Mute Indicator
It is placed in the upper left side of the screen when
enabled.
All prestored programs
will be deleted
To cancel mute, there are two alternatives; the first
one is pressing the
is increasing/decreasing the volume level.
button and the second one
OK
Cancel
Freeze Picture
You can freeze the picture on the screen by press-
Press the BLUE button to cancel APS if you do not
want to delete your existing programme list.
ing the OK button.
To continue APS, first select the country by pressing
“ ”or“ ”buttonandthenpresstheREDor“OK”button.
ZoomModes
Zoom mode can be changed by pressing the WIDE
button. You can change the screen size according
to the picture aspect ratio. Select the optimum one
from the following ZOOM modes.
APS is running...
UK - I
155,25 Mhz
01 - C-01
Cancel
Auto:
After APS is finalized, the programme table will ap-
pear on the screen.
When a WSS (Wide Screen Signalling) signal,
which shows the aspect ratio of the picture, is
included in the broadcast signal or the signal from
an external device, the TV automatically changes
the ZOOM mode according to the WSS signal.
Sourcemenu
By pressing “ ” or “ ” button, select the sixth icon.
Source menu appears on the screen.
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you
want to change the ZOOM mode, change to an-
other ZOOM mode manually.
SOURCE : TV
TV
Full:
EXT - 1
EXT - 2
EXT - 2S
EXT - 3
EXT - 4
EXT - 4S
EXT - 5
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the Full mode to restore the picture to its
original shape.
Cinema:
In source menu, highlight a source by pressing “
or “ ” button and switch to that mode by pressing
”
This zooms up the wide picture (16:9 aspect ratio)
to the full screen.
“ ” or “ ” or “OK”button.
- 13 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1317MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Teletext
Teletext is an information system that displays text
on your TV screen. Using the Teletext information
system you can view a page of information on a
subject that is available in the list of contents (in-
dex).
16:9 Subtitle:
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
To Operate Teletext
• Select a TV station where Teletext is being trans-
mitted.
• Press the
button. Usually the list of contents
(index) is displayed on the screen.
“Default Zoom” Modes:
4:3
Use to view a normal picture (4:3 aspect ratio) as
this is its original shape.
SOUND
PICTURE FEATURE
INSTALL
WIDE
PC
GUIDE
14:9 Zoom:
This zooms up the wide picture (14:9 aspect ratio)
to the upper and lower limits of the screen.
To Select A Page Of Teletext
• Press the appropriate digit buttons for the re-
quired Teletext page number.
The selected page number is displayed in the top
left corner of the screen. The Teletext page counter
searches until the selected page number is located,
the desired page is then displayed on the screen.
Panoramic:
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
• Press the “ ” or “P +” button to move the Tele-
text screen forward one page at a time.
• Press the “ ” or “- P” button to move the Tele-
text screen backward one page at a time.
To Select Index Page
• To select the page number of the index (generally
The top and bottom of the picture are slightly cut off.
page 100), press the
button.
To Select Teletext With A TV
Programme
• Press the
button. The text is now superim-
posed over the programme on the screen.
• Press the
page.
button again to return to the Teletext
To Select Double Height Text
• Press the
button for the top half of the infor-
mation page to be displayed in double height text.
• Press the
button again for the bottom half of
the information page to be displayed in double
- 14 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1417MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
height text.
• Press the
Fastext
button once more for the full page of
Your TV supports the 1000 page Teletext system.
When the page number of any of the 1000 pages in
memory is entered, the system will not search for
the requested page; instead it will display the page
automatically. If the requested page is not in memory,
the system will search for the requested page num-
ber and save the 1000 pages including the requested
page into memory after finding it.
normal height text.
To Reveal “Concealed” Information
• Pressing the
on a quiz or games page.
button once will reveal answers
• Pressing the
vealed answers.
button again will conceal the re-
• Press the “ ” button to move the Teletext screen
forward one page at a time.
To Stop Automatic Page Change
The teletext page you have selected may contain
more information than what is on the screen; the
rest of the information will be displayed after a pe-
riod of time.
• Press the “ ” button to move the Teletext screen
backward one page at a time.
For Fastext
The subject-heading for the information may have a
particular colour.
• Press the
change.
button to stop the automatic page
• Press an appropriate RED, GREEN, YELLOW or
BLUE button in order to reach the relevant page
quickly.
• Press the
button again to allow the next page
to be displayed.
For TOP text
To Select A Subcode Page
TOP text mode of operation will be activated auto-
matically according to the transmission.
Subcode pages are subsections of long Teletext
pages that can only be displayed on the screen one
section at a time.
• If TOP text transmission is present, colour coded
buttons will appear in status row.
• Select the required Teletext page.
• If TOP text transmission is not present, status row
will not appear.
• Press the
button.
• Select the required subcode page number by
pressing four digit buttons (e.g. 0001).
The subject-heading for information may be located
in coloured box.
• If the selected subcode page is not displayed in a
In Top mode the “ ” or “ ” commands will re-
short time, press the
will be displayed on the screen.
button. TV programme
quest the next or previous page respectively. If TOP
text transmission is not available, in case of opera-
tion of these commands, wraparound occurs. For
example page 100 appears to be one greater than
page 199.
• Teletext page number will be displayed on the up-
per left corner of the screen when the selected
page is found.
• Press the
text page.
button to display the selected Tele-
To Exit Teletext
• Press the
mode.
button. The screen will switch to TV
To Display The Time
• While watching a TV programme with Teletext
transmission press the
button. The current
time information, captured from Teletext will be
displayed on the screen.
• If the programme being watched does not have
Teletext transmission, no information will be dis-
played.
- 15 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1517MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Connect a decoder without an aerial
socket to the TV
Connect Peripheral Equipment
There is a wide range of audio and video equipment
that can be connected to your TV.
• Connect the decoder to the TV with a SCART
cable to SCART 1.
The following connection diagrams show you where
thedifferent (Optional)equipmentshouldbeconnected
at the rear side of the TV.
TV And Video Recorder
• Connect the aerial cables.
HighDefinition
Better picture quality can be obtained if you also
connect a SCART cable to SCART sockets.
Your LCD Television is capable of displaying High
Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These
devices must be connected via the HDMI socket
(EXT-5) or Component Socket (EXT-3). These sock-
ets can accept either 720p or 1080i signals.
Playback NTSC
To use this option you can;
• Connect an NTSC VCR player to a SCART socket
at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks at the
right side of the TV.
Note: For proper connection of a device to HDMI
input of your TV via using a DVI-to-HDMI
cable, use ExtAudio In (PCAudio In) for sound
connection.
AV
Then, press
buttonto selectappropriate source.
CopyFacility
Source selection for VCR recording.
Via The SCART
LCD TV has 2 SCART sockets. If you want to con-
nect peripherals (e.g. video, decoder, etc.) which
have SCART sockets to the TV, use SCART 1 or
SCART 2.
• Select Feature menu.
• Select Ext-2 Out by pressing “ ” or “ ” button.
• Select a source to copy the picture from that
source.
If an external device is connected via the SCART
sockets, the TV will be switched to AV mode auto-
matically.
Search For And Store The Test Signal
Of The Video Recorder
• Unplug the aerial cable from the aerial socket of
your video recorder.
• Do not connect Digital Set Top Box devices via
SCART 1. Use SCART 2.
Via Aerial Input
• Switch on your TV and put the video recorder on
the test signal. (See the booklet for your video re-
corder.)
If you want to connect to your TV, peripherals like
video recorders or decoders, but the device you
want to connect does not have a SCART socket,
you should connect it to the Aerial input of the TV.
• Enter the Install menu and select search.
• Search for the test signal of your video recorder
in the same way as you searched for and stored
the TV signals. Store the test signal under
programme number 0.
If the VCR is connected via Aerial input it is
suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of programmes.
Most of them are free, others are to be paid for by
the viewer. This means that you will need to sub-
scribe to the broadcasting organisation whose
programmes you wish to receive. This organisation
will supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
• Replace the aerial cable in the aerial socket of
your video recorder once you have stored the test
signal.
Camera And Camcorder
To Connect To AV Input
Connect your camera or camcorder to AV (EXT-4)
input at the right side of the TV.
For further information ask your dealer. See also
the booklet supplied with your decoder.
• Connect your equipment to the TV via VIDEO (yel-
low), AUDIO R (red) and AUDIO L (white) inputs.
You must connect the jacks to the input using the
same colour.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
- 16 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1617MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
To Connect To S-VHS Input
Tips
Care Of The Screen
Connect your camera or camcorder S-VHS input
(EXT-4S) at the right side of the TV.
Clean the screen with a slightly damp, soft cloth. Do
not use abrasive solvents as they may damage the
TV screen coating layer.
• Connect your equipment to the TV via S-VHS input
and audio inputs of AV inputs by using S-VHS
cables.
Poor Picture
EXT-2 S Mode
Have you selected the correct TV system? Is your
TV set or house aerial located too close to non-
earthed audio equipment or neon lights, etc.?
If the equipment connected to your TV set supports
S-Video (Y/C) output from Euroconnector, you can
have a better picture quality by selecting EXT-2 S
mode and connecting your equipment to the EXT.2
(EXT-2 S) terminal of TV. See your equipment’s
booklet to check if your equipment has such fea-
ture.
Mountains or high buildings can cause double pic-
tures or ghost images. Sometimes you can improve
the picture quality by changing the direction of the
aerial.
Is the picture or Teletext unrecognisable? Check if
you have entered the correct frequency.
Connect The Decoder To The Video
Recorder
Some video recorders have a special SCART socket
for decoder.
The picture quality may degrade when two periph-
erals are connected to the TV at the same time. In
such a case, disconnect one of the peripherals.
• Connect a SCART cable to the SCART socket of
your decoder and to the special SCART socket of
your video recorder. Refer to the booklet of your
video recorder.
NoPicture
Is the aerial connected properly?Are the plugs con-
nected tightly to the aerial socket? Is the aerial cable
damaged? Are suitable plugs used to connect the
aerial? If you are in doubt, consult your dealer.
• To connect your video recorder to the TV,
refer to the TV and Video Recorder section.
No Picture could mean that your TV is not receiv-
ing a transmission. Have you selected the correct
button on the remote control?
If you want to connect more equipment to your TV,
consult your dealer.
ConnectingHeadphones
Use the stereo headphone socket at the right side
of the TV, to connect headphones.
Sound
Has the mute button been pressed?
Sound is coming from only one of the speakers. Is
the balance set to one extreme? See Sound menu.
ConnectingSubwoofer
Use Subwoofer Out socket to connect an exter-
nal, active subwoofer to the set to give a much
deeper bass effect.
Remote Control
Your TV no longer responds to the remote control.
Perhaps the batteries are exhausted. If so you can
still use the local buttons at the side of the TV.
Connecting External Equipment
To connect audio amplifiers or home theatre sys-
tems to your TV, use the Audio Line Outs of the TV.
Have you selected the wrong menu? Press the
button to return to TV mode or press the “M” button
to return to the previous menu.
Nosolution:
Do not attemt to repair the TV yourself. Contact a
qualified service engineer.
- 17 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1717MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
Aerial Connection
Outdoor Aerial Connection
Round 75 ohm coaxial cable
75
VHF/UHF
Rear of TV
Connect Peripheral Equipment
either connect the aerial straight to your TV...
...or connect the aerial through a VCR...
Aerial (RF) Socket
LCD TV
(RF) connector
lead VCR to TV
Optimal Scart Lead
Aerial (RF) Socket VCR TV to VCR
wall
socket
wall
socket
Aerial (RF)
Lead
Aerial (RF) Socket
ANT.IN
AV-1
Aerial (RF)
Lead
AV-2
VCR
• It is recommended that a scart lead should be fitted between your TV and
VCR to enhance your picture and sound quality. Scart leads are essential
...or through a VCR and satellite decoder.
if you have a stereo TV and VCR and wish to obtain stereo sound from
your equipment. These leads can be purchhased from your dealer
or any good High Street electrical retailer.
LCD TV
...or through a satellite decoder...
RF Lead from
VCR to TV
LCD TV
• Scart Lead to
EXT-1o n T V.
RF Lead
from VCR to
Satellite
TV
VCR
ANT.IN
RF Lead from
Aerial
Satellite to TV
•
Scart Lead to
EXT-1 on TV.
Aerial
RF Lead to
Aerial
Satellite LNB lead
TV
VCR
ANT.IN
ANT.IN
AV-1
RF Lead to Aerial
Satellite LNB lead
AV-2
VCR
headphone connection
camcorder connection
L
L
R
R
SUB-OUT
IN/OU
T
OUT
DC IN
A/VIN/OUT
S
Headphone
- 18 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1817MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
PANEL
16:9 display, 37” Screen Size
Specifications
TVBROADCASTING
POWER CONSUMPTION (W)
180 W
PAL/SECAM B/G D/K K' I/I' L/L'
2,3 W (Stand-by)
RECEIVINGCHANNELS
VHF(BAND I/III)
UHF (BAND U)
DIMENSIONS (mm)
D
L
H
Weight (kg)
HYPERBAND
CABLE TV (S1-S20/ S21-S41)
With foot
250
128
1062
1062
646
607
21,2
19,4
Without foot
NUMBEROFPRESETCHANNELS 100
CHANNELINDICATOR
On Screen Display
PANEL
16:9 display, 42” Screen Size
RFAERIALINPUT
POWER CONSUMPTION (W)
210 W
75 Ohm (unbalanced)
OPERATINGVOLTAGE
1,3 W (Stand-by)
220-240V AC, 50 Hz.
DIMENSIONS (mm)
D
L
H
Weight (kg)
AUDIO
German+Nicam Stereo
With foot
285
124
1185
1185
744
693
29,2
26,4
Without foot
AUDIO OUTPUT POWER (WRMS.) (%10 THD)
2 x 8
HDMI DisplayModes List
Horizontal pixels x
Vertical Scan Line
Front Rate Aspect Ratio
1920x1080i
1920x1080i
1280x720p
1280x720p
720x576p
720x480p
720x576i
60Hz
50Hz
60Hz
50Hz
50Hz
60Hz
50Hz
60Hz
60Hz
16:9
16:9
16:9
16:9
16:9
16:9
16:9
16:9
4:3
720x480i
640x480
- 19 -
01-ENG-37737W-42737W-1072 UK-37-42 INC1917MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)02.04.2007,11:17
|