Introduction
Thank you for purchasing the LINDY PCIe two Port Serial. This card is
equipped with one high speed RS-232 serial interfaces.
The serial ports include 128Byte FIFO with speeds up to 921Kb/Sec.
Port Specification
PCIe 2S (16C950 128 FIFO)
Serial Port:
•
•
Chipset: Oxford 952, 128Byte DMA FIFO
Compatible chips: with 16C950, 16C750, 16C650, 16C550,
and 16C450.
User Manual
English
•
•
IEEE standard: RS-232 Interface
Max. Speed: Bi-directional speeds from 50 bps to
15Mbps/port.
•
2 x DB9 Male
Package Contents
°
°
°
1 x LINDY PCIe 2S Card
LINDY User manual
LINDY Driver CD
LINDY No. 51187
Installation
Technical Specifications
1. Turn off the power of your computer and remove the power
cable
•
•
•
Support x1,x2,x4,x8,x16ΰlaneαPCI-Express Bus
connector keys
Operating system: DOS, WIN 9.x, ME, NT, 2000, XP, 2003
Server, VISTA, LINUX,
2. Install the PCI card into an available PCI slot in your computer
3. Connect the peripheral ie Printer, Modem, etc. to the adapters
port
4. Re-connect the power cable & turn on the power of your
computer
PCI device listing display (for example…)
5V / 12V / RI (no power) power selectable on each
individual port (Pin 9th
)
•
•
•
•
•
Ready of the Intel and AMD 32/64-bit CPU System
Built-in 128 byte hardware FIFO
IRQ and IO address assigned by System
Certified by Microsoft WHQL, CE, FCC approval
PCB: 80 x 65 mm
Bus Device Func
Vendor ID Device
ID
Device Class IRQ
IDE Controller 14
Simple COMM. 10
Controller
No
No
No
1
0
0
7
8086
1409
7010
7168
0
13
If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an
error occurs, please try another PCI slot.
Once the hardware has installed correctly you can start installing the
software from the driver CD.
Pin Assignments
Serial 9 Pin male connector pin assignments:
Serial 9 Pin male connector :
Pin
1
Signal
CD
Pin
4
5
Signal
DTR
GROUND
Pin
6
7
Signal
DSR
RTS
Pin
8
9
Signal
CTS
RI
2
RD
3
TD
|